The situation you recognize

Your Google Ads account shows 8 conversions last month. Your CRM shows 20 inbound leads for the same month. The report says one campaign is expensive, and the obvious move is to pause it. Before you do that, spend 60 seconds on a calculation that can change the decision entirely.

How a tracking gap distorts campaign performance

Illustrative example: two campaigns each spend $800 a month. Google Ads shows 2 conversions for Campaign A, so its cost per lead looks like $400. Campaign B shows 6 conversions, about $133 per lead, and looks like the winner. But your CRM logged 20 leads, not 8, so 12 leads arrived with no tracked source. Where they came from decides everything. If they were spread in proportion to what Google already sees, A would have 5 leads ($160 each) and B would have 15 ($53 each), and B would still be the better campaign. Now say 10 of the 12 untracked leads were phone calls from Campaign A, which nobody set up to be counted. Then A brought 12 leads, about $67 each, and B brought 8, $100 each. Pausing A would cut your best campaign.

What this means for your budget decision

The size of the gap tells you how far to trust the report. Where the gap comes from tells you which campaigns the report gets wrong. Untracked leads rarely spread evenly: if one campaign drives most of your phone calls and calls are not tracked, that campaign looks worse than it is. Fix the measurement first. Then the budget conversation becomes straightforward.

How to run this calculation with your own numbers

Pull two numbers for the same month. First, from your CRM or your sales manager: how many inbound leads came in, regardless of source. Second, from Google Ads: how many conversions the account reported. Divide the Google Ads number by the CRM number. In the example, 8 divided by 20 is 40%: Google saw only 40% of the leads. The further this share is below 100%, the less you can trust any campaign-level cost per lead.

Then find where the missing leads come from. If your CRM records the lead source or the campaign for each lead, compare it with Google’s numbers campaign by campaign. In Google Ads, open Goals, then Conversions, and check which conversion actions exist. Calls from your ads and calls to the number on your website are two separate setups; if either is missing, those calls are not counted.

Frequently asked questions

How do I know if my Google Ads tracking gap is serious enough to act on?
Divide the conversions Google Ads reported by the leads your CRM logged for the same month. If Google sees only part of your leads, campaign-level cost per lead is unreliable, and pausing or scaling a campaign on those numbers can backfire.

What causes Google Ads conversion tracking gaps?
Common causes are phone calls that are not set up as conversions, a conversion tag missing from the thank-you page after a form, or a tag that fires at the wrong moment. Checking which conversion actions exist under Goals, then Conversions, is the first step.

Should I fix tracking before touching the budget?
Yes, if the gap is large. A cut made on incomplete data can remove the campaign that brings the leads you cannot see. Fixing the measurement usually takes less time than a month of budget spent on the wrong decision.


You may be cutting campaigns that bring real leads while keeping ones that only look good in the report. If this sounds like your account, book a 20-minute call at https://calendly.com/pirohovmarketing/new-meeting and send me your site beforehand. I spend those 20 minutes on it and tell you the one thing I would fix first. If it makes sense to go deeper, there is a paid diagnostic after that.